Specifications
Asphalt / Pavers Category Spec Sheet
Asphalt pavers are crucial for road construction, laying down asphalt mixtures smoothly and efficiently. Their specifications vary significantly based on the type of paving required, from small pedestrian paths to multi-lane highways, impacting their engine power, paving width, and overall operating capacity.
AI-updated monthly · Last refresh 7/18/2026
Specifications by system
Engine
Horsepower80-500 hpHigher horsepower is essential for wider paving widths and larger material volumes.
Fuel Capacity40-150 gallonsEnsures extended operation times without frequent refueling.
Emission StandardTier 3-5Compliance with regional environmental regulations.
Paving Performance
Paving Width4-25 ftAdjustable range for various road sizes; some models can extend further with attachments.
Paving Speed0-150 ft/minOperating speed while laying asphalt.
Maximum Paving Thickness2-12 inchesDetermines the depth of the asphalt layer.
Hopper Capacity5-20 tonsVolume of asphalt material the paver can hold.
Dimensions
Operating Weight15,000-80,000 lbsIncludes the paver and sometimes a full hopper.
Overall Length15-30 ftLength from front of hopper to rear of screed.
Transport Width8-12 ftCritical for legal road transport without special permits.
Operating Height10-15 ftHeight including exhaust stack and cab.
Screed
Screed TypeFixed, Extendable, High CompactionAffects paving width flexibility and asphalt density.
Heating MethodElectric, PropaneEnsures the asphalt remains workable and prevents sticking.
Vibration Frequency1,000-3,000 vpmContributes to compaction and smoothness of the asphalt.
Hydraulics
Hydraulic Pump Flow30-100 gpmPowers screed extension, conveyor, and auger systems.
System Pressure2,000-4,000 psiOperating pressure for hydraulic components.
Weight classes
| Class | Weight range | Typical use |
|---|---|---|
| Compact/Utility | under 20,000 lbs | bike paths, driveways, small parking lots |
| Mid-Size Highway | 20,000-50,000 lbs | county roads, urban streets, large parking lots |
| Heavy Highway | over 50,000 lbs | interstates, major highways, airport runways |
Common attachments
Screed extensionsMaterial transfer vehicles (MTV)Joint matching shoesUmbilical cord for automatic grade controlTruck hitchesSonic sensorsLaser receiversSlope sensorsPower tunnel extensionsLight kits
Typical price ranges
Used Entry-Level
$25,000 - $75,000Older models, higher hours, suitable for light-duty work or local projects.
Used Mid-Range
$75,000 - $250,000Newer used models with modern features, good for medium-scale projects.
New Standard
$250,000 - $500,000Brand new, base models with essential features for a variety of tasks.
New High-Performance
$500,000 - $1,200,000+New advanced models with premium features, wider paving widths, and integrated technology for major highway projects.
Buyer tip: Always verify the screed condition, the presence of automatic grade and slope control systems, and the maintenance history of hydraulic components. Check for proper functioning of conveyors and auger systems for consistent material flow.